Slatted Grill 2.1 Wireless Speaker – BUILD PLAN
$34.95
Build this Multiroom Wireless Speaker by downloading this detailed 39 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This plan is good for the beginner who has done some woodworking before, and can easily be built by the intermediate and advanced builder.
*Build plan dimensions are given in millimetres.
Description
Description
Watch the build video below.
This 2.1 Channel Wireless Speaker was designed around two Dayton Audio RS100 full range drivers and a Tang Band W5 subwoofer driver in a rear double slot-ported bass reflex enclosure. The speaker is powered with an Arylic Up2Stream 2.1 Amplifier with various input options, from Bluetooth, Wi-Fi, Aux input, Ethernet Port and is also Apple Airplay capable. The goal was to have a very good sounding and stylish speaker that is maybe a bit unusual from the norm. The speaker is tuned with ACPWorkbench DSP software to give a very flat response within 1.5dB of reference. Included in the build plans as separate files, are a few DSP profiles that can be loaded to the amplifier board. When following this build plan, it can easily be built with everyday woodworking tools by someone that does not have advanced woodworking skills. The construction follows simple butt joints.
When following this build plan, the end result should give you a system that will have the following approximate specifications:
- Power Output: (Stereo) 30 Watts per channel, (Mono) 60 Watts one channel
- Bass Principle: Bass Reflex with approximate -3dB of 40Hz.
- Approximate Size (W x H x D): 280 mm x 525 mm x 173 mm
