Sound Bar V2 & 6.5inch Subwoofer Combo – BUILD PLANS

$35.95

Build this 2.1 Sound Bar & Subwoofer System by downloading the two detailed 36 and 28 page plans that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the beginner and above skilled builder.

*Build plan dimensions are given in millimetres.

Categories: , ,

Description

Description

This sound bar was designed around 2.5 inch full range drivers and 3/4 inch tweeters. The left and right enclosures are sealed. This sound bar is intended to be used with the 6.5 inch subwoofer build with 2.1 amplifier module. You can also connect this sound bar to an AVR or to a subwoofer with 2.1 amplifier output.

The goal was to design and build an elegant looking system that can fit into most home environments. When following this build plan, it can easily be built with everyday woodworking tools by someone with beginner woodworking skills. The construction follows butt joints. Finishing is up to you and you can follow my build exactly or opt for an enclosure that can be painted in the colour of your choice. I made this design for my 55inch TV, but if you want to adjust the length, you can just recalculate some of the dimensions to suit your TV.

This subwoofer was designed around a down-firing Tang Band 6.5 inch subwoofer driver. It is a ported bass reflex enclosure with the port firing forward. The goal was to have a relatively small and elegant looking subwoofer that can fit into most home environments.

The subwoofer design includes a plate amplifier that can be set to 2.1 or 0.1 output. This provides you with the ability to then use this subwoofer with any system or other amplified speakers or just set it to 2.1 and connect a pair of stereo speakers. The output of the specified plate amplifier is 30W+30W stereo, and 60W for the subwoofer channel.

When following this build plan, it can easily be built with everyday woodworking tools, and even by someone with beginner woodworking skills. The construction follows butt joints. Finishing is up to you and you can follow my build exactly or opt for an enclosure that can be painted in the colour of your choice.

When following this build plan, the end result should give you a 2.1 speaker system that will have the following approximate specifications:

Subwoofer:

  • Power Output: (Mono) 60 Watts (4 Ohms)
  • Bass Principle: Ported or Bass Reflex with approximate -3dB of 35Hz.
  • Approximate Size (W x H x D): 240 mm x 400 mm x 209 mm

Sound Bar:

  • Power Output: (Stereo) 30 Watts (4 Ohms) per channel
  • Enclosure Type: Sealed with approximate -3dB of approximately 120Hz
  • Frequency Response: +/- 2.5dB from 200Hz to 20000Hz
  • Approximate Size (W x H x D): 1235 mm x 82 mm x 82 mm

 

Watch the Build Videos Below

Related products