This build uses new drivers from Tang Band (http://www.tb-speaker.com) in the form of two 8″ coaxial drivers and an 8″ pancake style subwoofer driver. The quality of these drivers are exceptional, and this is definitely a high end build. These drivers perform very well, and sound smooth with great detail in the highs (up to 40000Hz), natural mid tones and the high power subwoofer provides plenty of bass down to 35Hz.
There is no build plan for this build due to its complexity, however the parts list and the SketchUp files are available to my Patreon supporters here: https://www.patreon.com/posts/2-1-tang-band-32023330
I will also share the files later to those who support me on YouTube Membership when it’s launched.
PARTS LIST:
- 2x Tang Band W8-2314 8″ Coaxial Full-Range Woofer – https://bit.ly/2syL04c
- 1x Tang Band W8-2282 8″ Low Profile Subwoofer 4 Ohm – https://bit.ly/2OEGoCi
- 1x Dayton Audio SPA250 250 Watt Subwoofer Plate Amplifier – https://bit.ly/2rHxHy1
- 2x Dayton Audio BPA-38SN HD Binding Post Banana Jack Pair Satin Nickel – https://bit.ly/33DX2pC
- A list to Crossover Components are available via my Patreon page (https://www.patreon.com/soundblab) and YouTube Membership.
- 18mm Birch Plywood
- 16mm Medium Density Fibre Board
- 4x Penn-Elcom F1615 Rubber Cabinet Foot – https://bit.ly/2DANOjC
- 1x Kicker KW1620 X Series Silver Tinned OFC Speaker Wire 16 AWG 20 ft. – https://bit.ly/2Dxcs4x
- 1x SHINA Chamfer Router Bit 45 Degree 1/2-Inch Shank 2-Inch Cutting Length About 1-Inch Cutting Height 2 Flutes – https://amzn.to/2q4DNrA
