This budget 2-Way Stereo Transmission Line Floor Standing Speaker set was designed around HiVi drivers in a transmission line enclosure. The tweeter is from Peerless. The goal was to have a speaker that will perform well above average when paired to good equipment. The drivers might be budget, but they perform well above their price class. We recommend that you use an amplifier that can handle a 4 Ohm load and is rated to produce at least 30 Watts per channel. When following the build plan, it can be built with everyday woodworking tools and by someone that has intermediate woodworking skills.
BUILD PLAN: https://bit.ly/3bHIMGt
Parts and Tools:
- Speaker wire (14 AWG) – (US) https://bit.ly/2BuKbLc , (EU) https://bit.ly/39erRI4
- Gold Binding Posts Banana Speaker Terminals – (US) https://bit.ly/3aHgtav , (EU) https://bit.ly/3atemac
- Hi-Vi B4N Mid-Woofer Driver – (US) https://bit.ly/3a4zyQG , https://bit.ly/2S7lHD2 , (CA) https://bit.ly/3mBTgIE , (EU) https://bit.ly/33ZIEe1 , (AliExpress) https://bit.ly/3wHElRI , (IN) https://bit.ly/ 3dQ6vkY
- Peerless by Tymphany (Vifa) BC25TG15-04 1″ Silk Dome Tweeter – (US) https://bit.ly/3bFEH2w , https://bit.ly/3wh3YrF , (EU) https://bit.ly/2QEM3fq , https://bit.ly/2S84BoK
- Polyester Batting (Dacron, 1 ounce per square foot, 1 inch thick) – https://amzn.to/3GO1wiG
- Speaker Grill Foam Mesh 3mm – https://amzn.to/3xrFIp5
Drive Units:
- Tweeter: Peerless BC25TG15-04 Soft Dome Tweeter
- Woofer: HiVi B4N 4 inch Mid-Woofer
Enclosure Description:
- Transmission Line
Frequency Response:
- -3dB at 46Hz and ±3dB up to 20000Hz on reference axis
Sensitivity:
- Approximately 86dB
Impedance:
- 4 Ohm (Nominal)
Recommended Amplifier Power:
- At least 30W per channel into 4 Ohms
Dimensions:
- (W x H x D): 125 mm x 900 mm x 230 mm
These speakers are as good with music as they will perform in a home theatre setup. Soundstage and imaging is excellent and the vocals are very neutral with a clear high end that is detailed and will not become fatiguing over time.
