This 2-Way Stereo Floor Standing Speaker set was designed around a Mark Audio 4inch full range driver and a Tang Band 5inch subwwoofer driver in a bass reflex enclosure. The goal was to have a speaker that will perform well above average when paired to good equipment with the advantages of a full range poiunt source driver, supported by a subwoofer driver to give us that full sound we get from a speaker that can dig deep to 30Hz and extend all the way up to 20000Hz and beyond. We recommend that you use an amplifier that can handle a 4 Ohm load and is rated to produce at least 50 Watts per channel.

BUILD PLAN: https://bit.ly/3JDVUc8

Parts and Tools:

When following this build plan, the end result should give you speakers that will have the following approximate specifications:

Drive Units:

  • Tweeter: Mark Audio CHR-70 Full Range Driver
  • Woofer: Tang Band W5 Subwoofer

Enclosure Description:

  • Sealed Full Range enclosure
  • Bass Reflex Subwoofer enclosure

Frequency Response:

  • -3dB at 31Hz and ±3dB up to 20000Hz on reference axis

Sensitivity:

  • Approximately 86dB

Impedance:

  • 4 Ohm (Nominal)

Recommended Amplifier Power:

  • At least 50W per channel into 4 Ohms

Approximate Dimensions:

  • (W x H x D): 144 mm x 950 mm x 230 mm

These speakers are as excellent for acoustic and vocal music genres, but performs equally well across most genres of music. Soundstage and imaging is excellent and the vocals are very neutral with a clear high end that is detailed and will not become fatiguing over time.