This project is done and the results are very pleasing indeed! I love the industrial looks of these speakers, with the exposed compression driver and horn. The two small 4inch Dayton Audio woofers perform extremely well for such small drivers, with plenty of low-end punch. The B&C compression driver and horn provides smooth and non-fatiguing mid-range and high frequencies. The tuning of these speakers are relatively flat with a slight droop in the mid-range.
These are dynamic and punchy, but never loses control of the music.
Get the BUILD PLAN here.
Specifications:
Drive Units:
- Compression Driver and Horn: B&C DE250-8, B&C ME20
- Woofers: Dayton Audio TCP115-4
Enclosure Description:
- Bass Reflex
Frequency Response:
- -3dB at 42Hz
Sensitivity:
- Approximately 87dB
Impedance:
- 8 Ohm (Nominal)
Recommended Amplifier Power:
- At least 20W per channel into 8 Ohms
Approximate Dimensions:
- (W x H x D): 145 mm x 465 mm x 336 mm
Parts List:
- Speaker wire (14 AWG) – (US) https://parts-express.sjv.io/e4yRJz – (EU) https://bit.ly/39erRI4
- B&C DE250-8 Compression Driver – (US) https://parts-express.sjv.io/K0B9Ax – (EU) https://tinyurl.com/2tec7eyc
- B&C ME20 Horn – (US) https://parts-express.sjv.io/jeRBjM – (EU) https://tinyurl.com/3v5khmme
- Dayton Audio TCP115-4 Woofer – (US) https://parts-express.sjv.io/doN707 – (EU) https://tinyurl.com/2xxpmemr
- Terminal Cup 92 x 79 mm – (US) https://parts-express.sjv.io/n1rn3R – (EU) https://tinyurl.com/mry5jf9s
- Binding Posts Set – (US) https://parts-express.sjv.io/aON6mM – (EU) https://tinyurl.com/3ahb53kn
- 51mm (2 inch) Adjustable Bass Reflex Port – (US) https://parts-express.sjv.io/gORNVB – (EU) https://tinyurl.com/tymvsw96
