Home Theater Surround Speakers – Build Plan

$29.95

Build these Left and Right Surround Speakers by downloading this detailed 19 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the intermediate builder.

*Build plan dimensions are given in millimetres.

Description

Description

When following this build plan, the end result should give you speakers that will have the following approximate specifications:

Drive Units:

  • Tweeters: Peerless XT25SC90-04 Ring Radiator Tweeter
  • Woofer: Silver Flute W14RC25-08 5.5″ Woofer Wool Cone 8 Ohm

Enclosure Description:

  • Sealed box system

Frequency Response:

  • -3dB at 80Hz and ±3dB up to 40000Hz on reference axis

Sensitivity:

  • Approximately 87dB

Impedance:

  • 8 Ohm

Recommended Amplifier Power:

  • 30 – 120W into 6 to 8 Ohms

Dimensions:

  • (W x H x D): 365 mm x 230 mm x 158 mm

For approximately $170 plus the cost of wood and a few other parts, you can build yourself a very good set of left and right surround speakers. These speakers use a forward firing 5 inch woofer and two tweeters firing in a bi-pole configuration towards the side at a 45 degree angle. These speakers will work best mounted to the wall at approximately 1 meter above ear level, and approximately 10 degrees behind your optimal seating position.

Watch the Build Video Below