Sound Bar V2 – BUILD PLAN
$20.95
Build this Sound Bar by downloading this detailed 36 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the beginner and above skilled builder.
*Build plan dimensions are given in millimetres.
Description
Description
This sound bar was designed around 2.5 inch full range drivers and 3/4 inch tweeters. The left and right enclosures are sealed. This sound bar is intended to be used with a suitable subwoofer or the accompanying 6.5 inch subwoofer build, also available on this website as a build plan. You can also connect this sound bar to an AVR or to a subwoofer with 2.1 amplifier output.
The goal was to design and build an elegant looking system that can fit into most home environments. When following this build plan, it can easily be built with everyday woodworking tools by someone with beginner woodworking skills. The construction follows butt joints. Finishing is up to you and you can follow my build exactly or opt for an enclosure that can be painted in the colour of your choice. I made this design for my 55inch TV, but if you want to adjust the length, you can just recalculate some of the dimensions to suit your TV.
When following this build plan, the end result should give you a speaker that will have the following approximate specifications:
- Power Output: (Stereo) 30 Watts (4 Ohms) per channel
- Enclosure Type: Sealed with approximate -3dB of approximately 120Hz
- Frequency Response: +/- 2.5dB from 200Hz to 20000Hz
- Approximate Size (W x H x D): 1235 mm x 82 mm x 82 mm
Watch the Build Video Below
