Slimline 3-Way Stereo Speakers V2.0 – BUILD PLAN
$39.95
**Now with updated Tang Band Mid-range driver. Build these small and elegant 3-Way Stereo Speakers by downloading this detailed 28 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the intermediate builder.
*Build plan dimensions are given in millimetres.
Description
Description
When following this build plan, the end result should give you speakers that will have the following approximate specifications:
Drive Units:
- Tweeter: Dayton Audio ND25FA 4 ohm Tweeter
- Mid-range: Tang Band W3-881SJ 3inch Full Range Driver
- Woofer: Tang Band W5-1138SMF 4 ohm Subwoofer
Enclosure Description:
- Bass Reflex box system
Frequency Response:
- -3dB at 35Hz and ±2.5dB up to 20000Hz on reference axis
Sensitivity:
- Approximately 85dB
Impedance:
- 4 Ohm
Recommended Amplifier Power:
- 80-120W into 4 Ohms
Dimensions:
- (W x H x D): 115 mm x 800 mm x 250 mm (without feet or spikes)
For less than $300 plus the cost of wood and a few other parts, you can build yourself a set of 3-way floor standing speakers that will perform similar to commercial offerings that retail for around $4000, and utilises the some of the same drivers used in this design. These speakers perform excellently with music of a wide variety of genres. Soundstage and imaging is excellent and the vocals are very neutral with a clear high end that is detailed and will not become fatiguing over time. With high quality and well recorded music, these speakers disappear before you and you will not believe the sound is coming from such a small speaker. The wife acceptance factor (WAF) is also good on these, since they are so small. Note though, that they will need some breathing room from the back and side walls, at least 2 feet.
Watch the V2.0 Update Video Below
Watch the original V1.0 Build Video Below
