Arylic TWQT 2-Way Floor Standing Speakers – BUILD PLAN

$29.95

Build these amazing 2-Way Floor Standing Speakers that will go all the way down into the mid-twenties in room and extend to beyond 20000Hz by downloading this detailed 27 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the intermediate builder or above, but can also be taken on by a beginner builder willing to take the time to learn.

*Build plan dimensions are given in millimetres.

Categories: , ,

Description

Description

Listening to these speakers really surprised me. It sounds big and dynamic. The bass goes really low and from my perspective will not require a subwoofer at all. In-room response will easily go down into the mid-twenties. Listening for longer periods of time does not become fatiguing, with vocals and highs that are clear and does not get out of shape at higher volumes. The overall tone is neutral to warm in it’s presentation. These speakers, despite their size, has the ability to disappear very well in the soundstage and with certain music, and will extend beyond their physical position towards the sides. The soundstage is not the deepest I have ever heard, but rather big and wide. Imaging is spot on, and you can place instruments in their place with the right music.

I really like these, they have been fun to listen to, and have been in my setup for some time now. This is a fairly easy build, and I can highly recommend them as a project for anyone looking for a 2-way floor stander that has some punch and dynamics. Obviously the 6.5 inch woofer has it’s limits, so do not expect to drive them with bass heavy music to stupid sound pressure levels, however with sensitivity of around 87dB, these do not need too much power fromm your amplifier to go more than loud enough for the average sized room.

When following this build plan, the end result should give you speakers that will have the following approximate specifications:

Drive Units:

Enclosure Description:

  • Tapered Quarter Wave Tube (Voight Pipe)

Frequency Response:

  • -3dB at 32Hz and ±1dB up to 10000Hz on reference axis, with a rise in output from 10000Hz to 20000Hz (not audible)

Sensitivity:

  • Approximately 87dB

Impedance:

  • 4 Ohm (Nominal)

Recommended Amplifier Power:

  • At least 20W per channel into 4 Ohms

Approximate Dimensions:

  • (W x H x D): 226 mm x 1053 mm x 263 mm (not including swivel feet)

Related products