Home Theater Center Channel Speaker – Build Plan
$25.95
Build this Home Theater Center Channel Speaker by downloading this detailed 18 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the intermediate builder.
*Build plan dimensions are given in millimetres.
Description
Description
When following this build plan, the end result should give you a speaker that will have the following approximate specifications:
Drive Units:
- Tweeter: Peerless XT25SC90-04 Ring Radiator Tweeter
- Woofers: Silver Flute W14RC25-08 5.5″ Woofer Wool Cone 8 Ohm
Enclosure Description:
- Bass Reflex box system
Frequency Response:
- -3dB at 53Hz and ±3dB up to 40000Hz on reference axis
Sensitivity:
- Approximately 89dB
Impedance:
- 4 Ohm
Recommended Amplifier Power:
- 30 – 150W into 4 Ohms
Dimensions:
- (W x H x D): 567 mm x 202 mm x 278 mm
For approximately $120 plus the cost of wood and a few other parts, you can build yourself a very good center channel speaker. This center channel speaker is part of the Home Theater series and is a great match for the left and right stereo pair for which there are also build plans. It has been voiced to match the stereo pair and will give you a uniform front soundstage when used together. Vocals are clear and very neutral with a clear high end that is detailed and will not become fatiguing over time.
Watch the build video here.
