3-Way Bookshelf Speaker with Omni-Tweeter – BUILD PLAN
$39.95
Build these small and unique 3-Way Stereo Speakers by downloading this detailed 29 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the intermediate builder.
*Build plan dimensions are given in millimetres.
Description
Description
This 3-Way Stereo speaker set was designed around a Peerless 5-1/4 inch woofer, a Dayton Audio 4 inch Full Range driver and a 1 inch Dayton Audio Soft Dome tweeter in a rear slot ported bass reflex enclosure. The tweeter has a reflective lens in the form of a ball to make it omni-directional and fires upwards.
The goal was to have a relatively small 3-way speaker that can provide a real sense of scale with great soundstage, imaging and presence. These do not disappoint and will outperform anything you can find off the shelf for the same price as building these yourself in my opinion. We recommend that you use an amplifier that can handle a 4 to 8 Ohm load and is rated to produce at least 25 Watts per channel.
When following this build plan, it can be built with everyday woodworking tools and by someone that has intermediate woodworking skills. The construction follows butt joints. Finishing is up to you and you can follow my build exactly with the painted finish in the colour of your choice, or any other finish that will suit you.
When following this build plan, the end result should give you speakers that will have the following approximate specifications:
Drive Units:
- Tweeter: Dayton Audio ND25FA-4 1″ Soft Dome Neodymium Tweeter
- Mid-range: Dayton Audio RS100-8 4″ Reference Full-Range Driver
- Woofer: Peerless by Tymphany SDS-135F25CP02-04 5-1/4″ Paper Cone Woofer
Enclosure Description:
- Bass Reflex box system
Frequency Response:
- -3dB at 55Hz and ±2.5dB up to 20000Hz on reference axis
Sensitivity:
- Approximately 86dB
Impedance:
- 4 Ohm
Recommended Amplifier Power:
- 25-100W into 4 Ohms
Dimensions:
- (W x H x D): 145 mm x 282 mm x 257 mm (without reflective ball or feet or spikes)
Watch the build video below.
