Compact 2.5 Way Loudspeakers with Compression Driver & Horn BUILD PLAN
$34.95
Build these amazing Compact 2.5-Way Stand Mount Speakers with Compression Driver and Horn by downloading this detailed 27 page plan that will show you how to go about it. The plans provide you with detailed step-by-step instructions and a list and links to tools, parts and materials that you will need. This Build Plan is intended for the intermediate builder or above, but can also be taken on by a beginner builder willing to take the time to learn.
*Build plan dimensions are given in millimetres.
Description
Description
The results for this project is very pleasing indeed! I love the industrial looks of these speakers, with the exposed compression driver and horn. The two small 4 inch Dayton Audio woofers perform extremely well for such small drivers, with plenty of low-end punch.
The B&C compression driver and horn provides smooth and non-fatiguing mid-range and high frequencies. The tuning of these speakers are relatively flat with a slight droop in the mid-range.
These are dynamic and punchy, but never loses control of the music.
When following this build plan, the end result should give you speakers that will have the following approximate specifications:
Drive Units:
- Compression Driver and Horn: B&C DE250-8, B&C ME20
- Woofers: Dayton Audio TCP115-4
Enclosure Description:
- Bass Reflex
Frequency Response:
- -3dB at 42Hz
Sensitivity:
- Approximately 87dB
Impedance:
- 8 Ohm (Nominal)
Recommended Amplifier Power:
- At least 20W per channel into 8 Ohms
Approximate Dimensions:
- (W x H x D): 145 mm x 465 mm x 336 mm
